Cancellation of the more complicated ophthalmic inpatient surgeries in a tertiary general hospital: a 10-year retrospective study.

Background: Although ophthalmic ambulatory surgeries are less costly and may enhance the more efficient utilization of hospital resources, inpatient surgeries were preferable alternatives for patients with complicated eye diseases or poor general health. However, the incidence, causes, and related factors of ophthalmic inpatient surgery cancellation remained largely unknown. Methods: The electronic medical records of ophthalmic inpatient surgeries between January 2012 and December 2022 was retrospectively reviewed. Cancellation-related factors were explored using multivariate logistic regression analysis and the reasons of cancellation were also evaluated. Results: In total, 820 cancelled surgeries and 42,073 performed surgeries were included, with a cancellation rate of 1.9%. Any other ocular comorbidities were risk factors for cancellation (odds ratio (OR) 1.872, 95% confidence intervals (CI) 1.504-2.331; p < 0.001), while older age (OR 0.990, 95% CI 0.986-0.995; p < 0.001), local residence (OR 0.809, 95% CI 0.692-0.947; p = 0.008), any systemic comorbidities (OR 0.740, 95% CI 0.616-0.889; p = 0.001), and previous history of surgeries (OR 0.403, 95% CI 0.341-0.476; p < 0.001) were negatively associated with surgery cancellation. The top two categorical cancellation reasons were medical factors (508, 62.0%) and patient-related factors (285, 34.8%). "Patient/family refused surgery" (127, 15.5%), "acute conjunctivitis or uveitis relapse" (103, 12.6%), and "ocular condition improved and procedure no longer indicated" (71, 8.7%) were the three most common single cancellation reasons. Conclusion: Any other ocular comorbidities, younger age, no systemic comorbidities, non-local residence, and no past surgical history were related factors for ophthalmic inpatient surgery cancellation. The majority of cancellations were due to patient-related or medical factors. Great importance should be attached to the cancellation of the more complicated inpatient surgeries and further efforts are warranted to explore how to reduce cancellation.

SRP54 of black carp negatively regulates MDA5-mediated antiviral innate immunity.

Signal Recognition Particle 54 kDa (SRP54) is a subunit of the signal recognition particle (SRP), a cytoplasmic ribonucleoprotein complex guiding the transportation of newly synthesized proteins from polyribosomes to endoplasmic reticulum. In mammals, it has been reported to regulate the RLR signaling pathway negatively by impairing the association between MAVS and MDA5/RIG-I. However, the role of SRP54 in teleost antiviral innate immune response remains obscure. In this study, the SRP54 homolog of black carp (bcSRP54) has been cloned, and its function in antiviral innate immunity has been elucidated. The CDS of bcSRP54 gene consists of 1515 nucleotides and encodes 504 amino acids. Immunofluorescence (IF) showed that bcSRP54 was mainly distributed in the cytoplasm. Overexpressed bcSRP54 significantly reduced bcMDA5-mediated transcription of interferon (IFN) promoter in reporter assay. Co-expression of bcSRP54 and bcMDA5 significantly suppressed bcMDA5-mediated IFN signaling and antiviral activity, while bcSRP54 knockdown increased the antiviral ability of host cells. In addition, the results of the immunofluorescence staining demonstrated the subcellular overlapping between bcSRP54 and bcMDA5, and the co-immunoprecipitation (co-IP) experiment identified their association. Furthermore, the over-expression of bcSRP54 did not influence the protein expression and ubiquitination modification level of bcMDA5, however, hindered the binding of bcMDA5 to bcMAVS. In summary, our results conclude that bcSRP54 targets bcMDA5 and inhibits the interaction between bcMDA5 and bcMAVS, thereby negatively regulating antiviral innate immunity, which provides insight into how teleost SRP54 regulates IFN signaling.

Distance-based paper device coupled with uracil-rich DNA hydrogel for visual quantification of Uracil-DNA glycosylase.

Uracil-DNA glycosylase (UDG), an enzyme for repairing uracil-containing DNA damage, is crucial for maintaining genomic stability. Simple and fast quantification of UDG activity is essential for biological assay and clinical diagnosis, since its aberrant level is associated with DNA damage and various diseases. Herein, we developed a fully integrated "sample in-signal out" distance-based paper analytical device (dPAD) for visual quantification of UDG using a flow-controlled uracil-rich DNA hydrogel (URDH). The uracil base sites contained in the DNA hydrogel are mis-incorporated with dUTP by rolling circle amplification (RCA), which simplifies the preparation process of the functionalized hydrogel. In the presence of UDG, the uracil in URDH can be recognized and removed to induce the permeability change of URDH, resulting in the visible distance signal along the paper channel. Using dPAD, as low as 6.4 × 10-4 U/mL of UDG (within 80 min) is visually identified without any instruments and complicated operations. This integrated dPAD is advantageous for its simplicity, cost effectiveness, and ease of use. We envision that it has the great potential for point-of-care testing (POCT) in DNA damage testing, personalized healthcare assessment, and biomedical applications.

Tofacitinib therapy in systemic lupus erythematosus with arthritis: a retrospective study.

OBJECTIVE: To estimate the effectiveness and safety of tofacitinib in treating systemic lupus erythematosus (SLE) patients with arthritis. METHODS: This research was a retrospective cohort study that focused on SLE patients who had arthritis and were treated with tofacitinib at the Department of Rheumatology and Immunology from January 2020 to January 2022. Clinical outcomes, disease activity, immunological parameters, and adverse events were systematically evaluated pre- and post-treatment at 4, 12, and 24 weeks. RESULTS: Twenty-two patients were analyzed. At the 4-week mark, 5 (22.7%) patients were partially relieved, and 17 (77.3%) unalleviated. By the 12-week assessment, CR off corticosteroids was observed in four patients (18.2%), and CR on corticosteroids was seen in six patients (27.3%), with an additional six (27.3%) maintaining partial remission. At 24 weeks after treatment, three patients (13.6%) achieved CR off corticosteroids, ten patients (45.5%) achieved CR on corticosteroids, and all patients received remission. Compared to before treatment, The SLEDAI and PGA scores significantly improved. The level of C3 was increased significantly, and the absolute CD3+ T cell count, the 28-tender and the 28-swollen joint count, and the levels of serum IL-6 were significantly decreased at 24 weeks after treatment. CONCLUSION: Tofacitinib demonstrates significant therapeutic potential in SLE patients with arthritis, with a safety profile, and the therapeutic mechanism of tofacitinib may be related to reducing IL-6 expression and inhibiting T cell activation. Key Points • Tofacitinib demonstrates significant therapeutic potential in SLE patients with arthritis • The therapeutic mechanism of tofacitinib may be related to reducing IL-6 expression and inhibiting T cell activation.

SERS Platform for Integrated Enrichment, Isolation, and Identification of Multiple Respiratory Viruses in a Single Assay Using 3D Stereoscopic SERS Tags and Flocked Swabs.

Influenza (flu) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) exhibit similar clinical symptoms, complicating the diagnosis and clinical management of these critical respiratory infections. Thus, there is an urgent need for rapid on-site detection technologies that can simultaneously detect SARS-CoV-2 and influenza A viruses. Here, we have developed the first platform that combines in situ sampling with immune swabs and multichannel surface-enhanced Raman spectroscopy (SERS) for simultaneous screening of these two respiratory viruses in a single assay. A seed-mediated growth method was used to assemble a number of silver spheres on the surface of Fe3O4@SiO2 spheres, which not only creates extensive Raman hotspots but also provides numerous sites for Raman signaling molecules, enhancing the sensing sensitivity. Integrating two specific Raman signaling molecules into the nanospheres allows for the parallel detection of both viruses, improving the efficiency of SERS signal read-out. Rapid quantitative screening of both SARS-CoV-2 and H1N1 is achievable within 15 min, with detection limits of 7.76, and 8.13 pg·mL-1 for their respective target proteins. The platform demonstrated excellent performance in testing and analyzing 98 clinical samples (SARS-CoV-2:50; influenza A:48), achieving sensitivities of 88.00, and 95.83% for SARS-CoV-2 and influenza A, respectively. Pearson's correlation analysis revealed a significant correlation with the clinical CT values (P < 0.0001), underscoring the great potential of this platform for the early, rapid, and simultaneous diagnostic discrimination of multiple pathogens.

Targeted therapy for leukemia based on nanomaterials.

Leukemia is a kind of hematopoietic stem cell malignant clonal disease. Drug therapy is the core treatment strategy for leukemia, but the current therapeutic drugs have defects such as low bioavailability, large adverse reactions and inconvenient intravenous administration. Targeted therapy can combine drugs with specific carcinogenic sites on cells to kill cancer cells and avoid damage to normal cells, which has gradually become the mainstream method of leukemia treatment. In addition, nanomedicine delivery systems can significantly improve drug efficacy through controlled size and targeted optimization of drug delivery by modification strategies. Therefore, the targeted treatment of leukemia based on nanomaterials has great research value and application prospect. This paper gives an overview of the current therapeutic strategies for leukemia, and then reviews the cutting-edge targeted therapeutic nanomaterials for leukemia, including organic nanomaterials (mainly carbon-based nanomaterials, lipid materials, polymers, etc.) and inorganic nanomaterials (mainly noble metal nanoparticles, magnetic nanoparticles, hollow mesoporous materials, etc.). The challenges and prospects for the future development of targeted nanomaterials in the treatment of leukemia are also briefly reviewed.

Rheology and Printability of a Porcelain Clay Paste for DIW 3D Printing of Ceramics with Complex Geometric Structures.

The modeling of ceramics with complex geometric structures currently depends on the handcrafted mode, with long cycles, high costs, and low efficiency; additive manufacturing (AM) technology can solve this problem well. Herein, the porcelain clay paste was successfully prepared for the direct ink writing (DIW) 3D printing process of ceramics with complex geometric structures, and the effects of sodium citrate (SC) content on the rheological properties and DIW 3D printability of the porcelain clay paste were investigated in detail. The SC has a vital role in the rheological behavior of porcelain clay paste. Adding SC increases the absolute zeta potential and decreases the viscosity of the paste, while a high SC content will lead to a low storage modulus of the paste. The porcelain clay paste with an SC content of 0.05% and a paste solid content of 75% possesses suitable rheological properties and a storage modulus for DIW 3D printing. The as-prepared porcelain clay paste has high DIW 3D printability at a pressure of 0.5 MPa, and a 3D-printed green body with a well-densified structure can be achieved. After being sintered, the 3D-printed ceramic exhibits high densification and mechanical properties. A green body with complex geometric structures is quickly and precisely modeled by the DIW 3D printing process with the resultant porcelain clay paste as the raw material. This work provides a practical approach to rapidly fabricating ceramics with complex geometrical structures.

Performance of Halo-Alkali-Tolerant Endophytic Bacteria on Hybrid Pennisetum and Bacterial Community under Varying Soil Conditions.

Halo-alkali soil threatens agriculture, reducing growth and crop yield worldwide. In this study, physicochemical and molecular techniques were employed to explore the potential of halo-alkali-tolerant endophytic bacteria strains Sphingomonas sp. pp01, Bacillus sp. pp02, Pantoea sp. pp04, and Enterobacter sp. pp06 to enhance the growth of hybrid Pennisetum under varying saline conditions. The strains exhibited tolerance to high salt concentrations, alkaline pH, and high temperatures. Under controlled conditions, all four strains showed significant growth-promoting effects on hybrid Pennisetum inoculated individually or in combination. However, the effects were significantly reduced in coastal saline soil. The best growth-promoting effect was achieved under greenhouse conditions, increasing shoot fresh and dry weights of hybrid Pennisetum by up to 457.7% and 374.7%, respectively, using irrigating trials. Metagenomic sequencing analysis revealed that the diversity and composition of rhizosphere microbiota underwent significant changes after inoculation with endophytic bacteria. Specifically, pp02 and co-inoculation significantly increased the Dyella and Pseudomonas population. Firmicutes, Mycobacteria, and Proteobacteria phyla were enriched in Bacillus PP02 samples. These may explain the best growth-promoting effects of pp02 and co-inoculation on hybrid Pennisetum under greenhouse conditions. Our findings reveal the performance of endophytic bacterial inoculants in enhancing beneficial microbiota, salt stress tolerance, and hybrid Pennisetum growth.

Construction of competing endogenous RNA networks in systemic lupus erythematosus by integrated analysis.

Objective: Systemic lupus erythematosus (SLE) is a disease characterised by immune inflammation and damage to multiple organs. Recent investigations have linked competing endogenous RNAs (ceRNAs) to lupus. However, the exact mechanism through which the ceRNAs network affects SLE is still unclear. This study aims to investigate the regulatory functions of the ceRNAs network, which are important pathways that control the pathophysiological processes of SLE. Methods: CircRNA microarray for our tested assays were derived from bone marrow samples from three healthy individuals and three SLE patients in our hospital. The other sequencing data of circRNA, miRNA and mRNA were obtained from Gene Expression Omnibus (GEO) datasets. Using the limma package of R program, the differential expression of mRNA and miRNA in the GEO database was discovered. Then predicted miRNA-mRNA and circRNA-miRNA were established using miRMap, miRanda, miRDB, TargetScan, and miTarBase. CircRNA-miRNA-mRNA ceRNA network was constructed using Cytoscape, and hub genes were screened using a protein-protein interaction network. Immune infiltration analysis of the hub gene was also performed by CIBERSORT and GSEA. Results: 230 overlapped circRNAs, 86 DEmiRNAs and 2083 DEmRNAs were identified in SLE patients as compared to healthy controls. We constructed a circRNA-miRNA-mRNA ceRNAs network contained 11 overlapped circRNAs, 9 miRNAs and 51 mRNAs. ESR1 and SIRT1 were the most frequently associated protein-protein interactions in the PPI network. KEGG analysis showed that DEGs was enriched in FoxO signaling pathway as well as lipids and atherosclerosis. We constructed a novel circRNA-miRNA-mRNA ceRNA network (HSA circ 0000345- HSA miR-22-3-P-ESR1/SIRT1) that may have a major impact on SLE. Conclusion: Through this bioinformatics and integrated analysis, we suggest a regulatory role for ceRNA network in the pathogenesis and treatment of SLE.

Nanopore Blockade Sensors for Quantitative Analysis Using an Optical Nanopore Assay.

Nanopore sensing is a popular biosensing strategy that is being explored for the quantitative analysis of biomarkers. With low concentrations of analytes, nanopore sensors face challenges related to slow response times and selectivity. Here, we demonstrate an approach to rapidly detect species at ultralow concentrations using an optical nanopore blockade sensor for quantitative detection of the protein vascular endothelial growth factor (VEGF). This sensor relies on monitoring fluorescent polystyrene nanoparticles blocking nanopores in a nanopore array of 676 nanopores. The fluorescent signal is read out using a wide-field fluorescence microscope. Nonspecific blockade events are then distinguished from specific blockade events based on the ability to pull the particles out of the pore using an applied electric field. This allows the detection of VEGF at sub-picomolar concentration in less than 15 min.

PEI-Mediated Assembly of Fe3O4 onto SiO2-Encapsulated CsPbBr3 for Highly Sensitive Fluorescent Lateral Flow Immunoassay.

The conventional lateral flow immunoassay (LFIA) method using colloidal gold nanoparticles (Au NPs) as labeling agents faces two inherent limitations, including restricted sensitivity and poor quantitative capability, which impede early viral infection detection. Herein, we designed and synthesized CsPbBr3 perovskite quantum dot-based composite nanoparticles, CsPbBr3@SiO2@Fe3O4 (CSF), which integrated fluorescence detection and magnetic enrichment properties into LFIA technology and achieved rapid, sensitive, and convenient quantitative detection of the SARS-CoV-2 virus N protein. In this study, CsPbBr3 served as a high-quantum-yield fluorescent signaling probe, while SiO2 significantly enhanced the stability and biomodifiability of CsPbBr3. Importantly, the SiO2 shell shows relatively low absorption or scattering toward fluorescence, maintaining a quantum yield of up to 74.4% in CsPbBr3@SiO2. Assembly of Fe3O4 nanoparticles mediated by PEI further enhanced the method's sensitivity and reduced matrix interference through magnetic enrichment. Consequently, the method achieved a fluorescent detection range of 1 × 102 to 5 × 106 pg·mL-1 after magnetic enrichment, with a limit of detection (LOD) of 58.8 pg·mL-1, representing a 13.3-fold improvement compared to nonenriched samples (7.58 × 102 pg·mL-1) and a 2-orders-of-magnitude improvement over commercial colloidal gold kits. Furthermore, the method exhibited 80% positive and 100% negative detection rates in clinical samples. This approach holds promise for on-site diagnosis, home-based quantitative tests, and disease procession evaluation.

Klotho exerts protection in chronic kidney disease associated with regulating inflammatory response and lipid metabolism.

BACKGROUND: The anti-aging protein Klotho plays a protective role in kidney disease, but its potential as a biomarker for chronic kidney disease (CKD) is controversial. Additionally, the main pathways through which Klotho exerts its effects on CKD remain unclear. Therefore, we used bioinformatics and clinical data analysis to determine its role in CKD. RESULTS: We analyzed the transcriptomic and clinical data from the Nephroseq v5 database and found that the Klotho gene was mainly expressed in the tubulointerstitium, and its expression was significantly positively correlated with estimated glomerular filtration rate (eGFR) and negatively correlated with blood urea nitrogen (BUN) in CKD. We further found that Klotho gene expression was mainly negatively associated with inflammatory response and positively associated with lipid metabolism in CKD tubulointerstitium by analyzing two large sample-size CKD tubulointerstitial transcriptome datasets. By analyzing 10-year clinical data from the National Health and Nutrition Examination Survey (NHANES) 2007-2016, we also found that Klotho negatively correlated with inflammatory biomarkers and triglyceride and positively correlated with eGFR in the CKD population. Mediation analysis showed that Klotho could improve renal function in the general population by modulating the inflammatory response and lipid metabolism, while in the CKD population, it primarily manifested by mediating the inflammatory response. Restricted cubic spline (RCS) analysis showed that the optimal concentration range for Klotho to exert its biological function was around 1000 pg/ml. Kaplan-Meier curves showed that lower cumulative hazards of all-cause mortality in participants with higher levels of Klotho. We also demonstrated that Klotho could reduce cellular inflammatory response and improve cellular lipid metabolism by establishing an in vitro model similar to CKD. CONCLUSIONS: Our results suggest that Klotho exerts protection in CKD, which may be mainly related to the regulation of inflammatory response and lipid metabolism, and it can serve as a potential biomarker for CKD.

Plasma-Engraved Lattice-Matched NiO/NiFe2O4 Heterostructure with Ample Oxygen Vacancies for Efficient Water Electrolysis and Zn-Air Batteries.

Heterogeneous interface and defect engineering offer effective pathways to accelerate oxygen evolution reaction (OER) charge transfer kinetics and motivate optimal intrinsic catalytic activity. Herein, we report the lattice-matched NiO/NiFe2O4 heterostructure with ample oxygen vacancies (Vo-NiO/NiFe2O4) induced by a feasible hydrothermal followed by calcination and plasma-engraving assistant technique, which shows the unique porous microflower arrangement of intertwined nanosheets. Benefitting from the synergetic effects between lattice-matched heterointerface and oxygen vacancies induce the strong electronic coupling, optimized OH-/O2 diffusion pathway and ample active sites, thus-prepared Vo-NiO/NiFe2O4 presents a favorable OER performance with a low overpotential (261 mV @ 10 mA cm-2) and small Tafel slope (39.4 mV dec-1), even surpassing commercial RuO2 catalyst. Additionally, the two-electrode configuration water electrolyzer and rechargeable zinc-air battery assembled by Vo-NiO/NiFe2O4 catalyst show the potential practical application directions. This work provides an innovative avenue for strengthening OER performance toward water electrolysis and Zn-air batteries via the interface and vacancy engineering strategy.

Processing, Microstructure, and Performance of Robocast Clay-Based Ceramics Incorporating Hollow Alumina Microspheres.

The restoration of ancient ceramics has attracted widespread attention as it can reveal the overall appearance of ancient ceramics as well as the original information and artistic charm of cultural relics. However, traditional manual restoration is constrained due to its time-consuming nature and susceptibility to damaging ancient ceramics. Herein, a three-dimensional (3D) printing technique was employed to accurately restore Chinese Yuan Dynasty Longquan celadon using hollow Al2O3 microsphere-modified 3D printing paste. The results show that the hollow Al2O3 microsphere content plays a vital role in the printability, physical properties, and firing performance of the modified 3D printing paste. The printed green bodies show no noticeable spacing or voids under moderate rheological conditions. The as-prepared ceramic body modified with 6 wt.% hollow Al2O3 microspheres and fired at 1280 °C exhibits optimal bending strength of 56.66 MPa and a relatively low density of 2.16 g∙cm-3, as well as a relatively uniform longitudinal elastic modulus and hardness along the interlayer. This 3D printing technique based on hollow Al2O3 microsphere-modified paste presents a promising pathway for achieving non-contact and damage-free restoration of cultural relics.

Improvement of thermostability and catalytic efficiency of xylanase from Myceliophthora thermophilar by N-terminal and C-terminal truncation.

Introduction: Extracting xylanase from thermophilic filamentous fungi is a feasible way to obtain xylanase with good thermal stability. Methods: The transcriptomic data of Myceliophthora thermophilic destructive ATCC42464 were differentially expressed and enriched. By comparing the sequences of Mtxylan2 and more than 10 xylanases, the N-terminal and C-terminal of Mtxylan2 were truncated, and three mutants 28N, 28C and 28NC were constructed. Results and discussion: GH11 xylan Mtxylan2 was identified by transcriptomic analysis, the specific enzyme activity of Mtxylan2 was 104.67 U/mg, and the optimal temperature was 65°C. Molecular modification of Mtxylan2 showed that the catalytic activity of the mutants was enhanced. Among them, the catalytic activity of 28C was increased by 9.3 times, the optimal temperature was increased by 5°C, and the residual enzyme activity remained above 80% after 30 min at 50-65°C, indicating that redundant C-terminal truncation can improve the thermal stability and catalytic performance of GH11 xylanase.

Evolution of fermented grain yeast communities in strong-flavored baijiu and functional validation of yeasts that produce superior-flavored substances.

BACKGROUND: Baijiu is a well-known alcoholic beverage in China and the quality is determined by various microorganisms during the fermentation process. Yeast is one of the most important microorganisms in the fermentation of baijiu. It has a strong esterification capacity and also affects the aroma. RESULTS: High-throughput sequencing results showed that the fermented grains (jiupei) during baijiu production were mainly composed of eight highly abundant yeast species. The species and abundance of yeasts changed significantly with the fermentation process. The flavor of 30 yeast strains in the jiupei was determined by a sniffing test and gas chromatography-mass spectrometry (GC-MS). The strain with the highest flavor substance content (2.34 mg L-1), named YX3205, was identified as Clavispora lusitaniae. Tolerance results showed that C. lusitaniae YX3205 can tolerate up to 15% (v v-1) ethanol. In a solid-state simulated fermentation experiment, the content of 24 flavor substances was significantly increased in the fortified group, and the total ester content reached 4240.73 µg kg-1, which was 2.8 times higher than that of the control group. CONCLUSION: The present study demonstrated the potential of C. lusitaniae YX3205 to enhance the flavor of baijiu, thereby serving as a valuable strain for the improvement of the flavor quality of baijiu. © 2024 Society of Chemical Industry.

Analysis of differences in microorganisms and aroma profiles between normal and off-flavor pit mud in Chinese strong-flavor Baijiu.

The unique cellar fermentation process of Chinese strong-flavor Baijiu is the reason for its characteristic cellar aroma flavor. The types, abundance, community structure and metabolic activity of microorganisms in the pit mud directly affect the microbial balance in the white spirit production environment, promoting the formation of typical aromas and influencing the quality of CFSB. During the production process, the production of off-flavor in the cellar may occur. The aim of this study is to elucidate the differences in microbiota and flavor between normal pit mud and abnormal pit mud (pit mud with off-flavor). A total of 46 major volatile compounds were identified, and 24 bacterial genera and 21 fungal genera were screened. The esters, acids, and alcohols in the abnormal pit mud were lower than those in the normal pit mud, while the aldehydes were higher. 3-Methyl indole, which has been proven to be responsible for the muddy and musty flavors, was detected in both types of pit mud, and for the first time, high levels of 4-methylanisole was detected in the pit mud. The microbial composition of the two types of pit mud showed significant differences in the bacterial genera of Sporosarcina, Lactobacillus, Garciella, Anaerosalibacter, Lentimicrobium, HN-HF0106, Petrimonas, Clostridium_sensu_stricto_12 and Bacillus, and the fungal genera of Millerozyma, Penicillium, Mortierella, Monascus, Saccharomyces, Issatchenkia, Pithoascus, Pseudallescheria, and Wickerhamomyces. Additionally, we speculate that Sporosarcina is the predominant bacterial genus responsible for the imbalance of microbiota in pit mud.

USP40 promotes hepatocellular carcinoma cell proliferation, migration and stemness by deubiquitinating and stabilizing Claudin1.

BACKGROUND: Hepatocellular carcinoma (HCC) is a prevalent malignant tumor that poses a major threat to people's lives and health. Previous studies have found that multiple deubiquitinating enzymes are involved in the pathogenesis of HCC. The purpose of this work was to elucidate the function and mechanism of the deubiquitinating enzyme USP40 in HCC progression. METHODS: The expression of USP40 in human HCC tissues and HCC cell lines was investigated using RT-qPCR, western blotting and immunohistochemistry (IHC). Both in vitro and in vivo experiments were conducted to determine the crucial role of USP40 in HCC progression. The interaction between USP40 and Claudin1 was identified by immunofluorescence, co-immunoprecipitation and ubiquitination assays. RESULTS: We discovered that USP40 is elevated in HCC tissues and predicts poor prognosis in HCC patients. USP40 knockdown inhibits HCC cell proliferation, migration and stemness, whereas USP40 overexpression shows the opposite impact. Furthermore, we confirmed that Claudin1 is a downstream gene of USP40. Mechanistically, USP40 interacts with Claudin1 and inhibits its polyubiquitination to stabilize Claudin1 protein. CONCLUSIONS: Our study reveals that USP40 enhances HCC malignant development by deubiquitinating and stabilizing Claudin1, suggesting that targeting USP40 may be a novel approach for HCC therapy.

Relationships among the climate-relevant gases during the Southern Ocean bloom season.

The ocean plays an essential role in regulating the sources and sinks of climate-relevant gases, like CO2, N2O and dimethyl sulfide (DMS), thus influencing global climate change. Although the Southern Ocean is known to be a strong carbon sink, a significant DMS source and possibly a large source of N2O, our understanding of the interaction among these climate-relevant gases and their potential impacts on climate change is still insufficient in the Southern Ocean. Herein, we analyzed parameters, including surface water pCO2, dissolved inorganic carbon (DIC), alkalinity (TA), DMS and N2O in the water column, collected during the austral summer of 2015-2016 in the 32nd Chinese Antarctic Research Expedition (CHINARE) at the tip of Antarctic Peninsula. A positive correlation between DMS and pCO2 (indicated by deficit of DIC, ∆DIC, refer to values in 100 m) was observed in waters above 75 m, whereas no correlation between N2O saturation anomaly (SA) and DMS, ∆DIC was found. In the area with stable stratification with phytoplankton bloom, significant DMS source and strong CO2 uptake with weak N2O emission were observed. Conversely, strong mixing or upwelling area was shown to be a strong marine CO2 source and significant N2O release with weak DMS source.